Testing and Inspection Services

Soils and Piles
Earthwork
• Proof Roll Building & Parking Lot Sub Grade Soils
• Foundation Excavation
• Observations
• Qualification of Fill Material
• Field Density Tests (Compaction)
• Surcharge Inspection/Monitoring

Deep Foundations
• Pile Driving Record Logging
• Auger Cast and Drilled Shaft
• Pile Load Testing
• Vibration Monitoring
• PDA Testing
• Pile Integrity Testing

Laboratory Testing
• Gradation
• Organic Content
• PH
• Atterberg Limits
• Proctor
• Natural Moisture Content
• Chloride Content
• Sulfate Content
• Resistivity
• CBR
• Consolidation
• Triaxial
• Soils Analysis
• Hydrometer
• Unconfined compression test

Specialty Testing Installation
• Vibratory wire piezometers and settlement cells
• Horizontal and Vertical inclinometer pipework
• Sondex Settlement Systems
• Magnet extensometer equipment
• Digital data loggers

Pavements
• Design Services
• Pavement Section Design
• Specification Review
• Qualifications of Materials

Soils Density Testing
• Embankment
• Pipe Backfill
• Sub Grade
• Base
• Building Pad Fill Material

Soil Stabilization Testing
• California Bearing Ratio (CBR)
• Stabilization Designs
• Plate Load

Asphalt-Laboratory & Field
• Mix Designs
• Asphalt Content
• Gradation of extracted aggregates
• Coring
• Control strips
• Density Testing
• Certified Roadway Technician
Concrete Pavement
• Construction Inspection
• Compressive Strength
• Flexural Strength
• Joint Recommendations
• Core Thickness
Pavement Investigations
• Condition Surveys
• Failure Investigations
• Coring Pavement

Concrete
Field Testing & Inspection
• Inspection of Placement
• Sample and Mold Concrete
• Cylinders
• Slump and Temperature
• Air Content
• Compressive Strength
• Floor Flatness Profiling
Strength Testing
• Compressive and Flexural
• Strength
• Computer Statistical Analysis

Mix Designs
• Compressive Strength
• Shrinkage Studies
• Review and Verification of Mixes
In-situ Evaluation
• Schmitt Hammer
• Windsor Probe
• Coring and Laboratory Testing

Steel Reinforcement Location
• R-Meter

Masonry
Concrete Masonry Units and Mortar
• Compressive Strength
• Flow Tests
• Mix Designs
• Normal Consistency
• General Workmanship
Masonry Prisms
• Pre-construction Qualification
• Construction Control

Failure Investigation
• Moisture
• Cracking
• Structural Failure

Structural
Post Tensioning
• Stressing Inspection
• Post Tensioning Tendon Locations
• Equipment Calibration Certificate Verification

Fire Proofing
• Thickness
• Unit Weight
• Adhesion/Cohesion
Special Inspections
• Reinforcing Steel Placement Inspection
• Perform Inspections as Required Per Project Plans
• Provide Statement of Compliance

Structural Steel

Construction Services
• Review of Welder Qualifications
• Bolt Tensioning
• Inspection of Welds & Welding
• General Framing Inspection